Here is the look for the open ribs with the plywood off.
The metal ribs & exterior screws
The rear trailer lights & wiring
The finished 1" foam panels installed between the ribs
Securely tape everything to stop air leaks !!!
Friday, April 8, 2011
Insulation moving right along
Today I finished the front wall and started on the side walls. I screwed up a little and got the plywood out of alignment- meaning I had to make all new holes into the metal ribs. BIG - pain in the butt when I figured that out. WOW does it take a lot of power to drill into the metal ribs. Also if you over tighten, then you strip out the screw, not as easy as it looks.
Here is the look for the open ribs with the plywood off.
Here is the look for the open ribs with the plywood off.
Jerry, I just came over from Glenn's blog. I figure I'll start from the beginning. Pretty interesting project.
ReplyDelete