Pages

Thursday, August 29, 2013

First part of 2nd layer of insulation is starting

            Here we go, the second 1.5" layer of Dow blue board insulation is pictured below, each sheet is approx $25, this will be covered with 3/8" plywood and then 1/8" layer of oak paneling. This is mainly because this wall will hold the electric cabinet & the water heater, both are about 50lbs.

I wanna be 200% sure they will not come loose from the wall - either falling off would be a real disaster. It will be lots of fun drilling a 4.5" hole through approx an almost 4" thick wall.









2 comments:

  1. Ive been following you for a long time. I mean no disrespect here, but what is it your trying to achieve here with all that solar power? Are you planing on staying inside your trailer running the A/C all day?

    ReplyDelete
  2. Not sure where i will end up ? but as far as I know there is not another solar trailer or RV anywhere in the good old USA that can operate on 100% solar for the AC unit, so at the very least I will be the first. Most experts are of the opinion it cannot be done.

    ReplyDelete

Please leave your thoughts, I am always looking for new ideas.